Installation Of Click Laminate Flooring
Click laminate flooring is a popular choice for many homeowners because it is easy to install and can be done without the need for professional help. Here is a step-by-step guide on how to install click laminate flooring.
1. Prepare the Room: Before you begin, clear the room of all furniture and remove any existing flooring. It’s important to have a clean, level surface to work with.
2. Measure the Room: Measure the length and width of the room to determine how much flooring you will need. Be sure to add an extra 10% for waste and cuttings.
3. Acclimate the Flooring: Leave the flooring in the room for at least 48 hours before installation to allow it to acclimate to the temperature and humidity of the room.
4. Prepare the Subfloor: Make sure the subfloor is clean, dry, and level. If necessary, use a leveling compound to even out any low spots.
5. Lay the Underlayment: Lay down a foam underlayment to provide a cushion and sound barrier between the subfloor and the laminate flooring.
6. Lay the First Row: Start laying the first row of planks against the longest wall in the room, with the tongue side facing the wall. Use spacers to maintain a 1/4 inch gap between the planks and the wall.
7. Install the Remaining Rows: Continue laying the planks, connecting them with the click-lock system. Make sure the seams are tight and use a tapping block and hammer to gently tap the planks into place.
8. Cut the Planks: Use a saw to cut the last plank in each row to fit the remaining space. Measure and mark the plank before cutting to ensure a precise fit.
9. Install the Final Row: Install the final row of planks, making sure to maintain the 1/4 inch gap between the planks and the wall.
10. Install Baseboards: Once the flooring is installed, install the baseboards to cover the gap between the flooring and the wall.
11. Clean Up: Once the flooring is installed and the baseboards are in place, clean up any debris and enjoy your new flooring!
In conclusion, installing click laminate flooring is a relatively simple process that can be done without the need for professional help. With the right tools and preparation, you can have a beautiful new floor in no time.
